Skip to main content

VRPilot Guide (VRTrust)

A guide inside VRTrust that walks your team through setup in the right order, then points you to recurring tasks that need attention.

Who This Applies To: VRTrust teams setting up their account, and teams that want a running list of the clean-up work that keeps their books accurate.

Overview

VRPilot is a guide built into VRTrust. During onboarding, its Initial Setup checklist walks your whole team through setup in the right order. It takes you to the right screen for each step and shows a tip on the control to use once you're there.

Once you're up and running, Ongoing Tasks lists the recurring work that needs attention, such as unmapped PMS lines or unmatched bank transactions, so nothing slips through between month-end closes.


Where to Find It

By default, VRPilot is docked as a panel next to the navigation bar. When it's open, the page moves aside instead of being covered. If you prefer, you can switch it to floating in the bottom-right corner. See VRPilot Settings below.

  • Closed: a small button shows your next open step and a progress ring. Click it to open the guide.

  • Step by step: each step shows its description. Use Go to step to jump to the right screen, and the arrows to move to the previous or next step.

  • All steps: see every step with the Open, All and Done tabs. The guide opens on Open, so you only see steps with work left.

  • Switching guides: click the guide name at the top to switch between Initial Setup and Ongoing Tasks. The icon next to each shows whether it's open, skipped or done.


Initial Setup

Initial Setup walks you through these 16 steps, in order:

  1. Connect PMS

  2. Connect AI Agents

  3. Add Bank Accounts

  4. Connect Ramp (Optional)

  5. Connect Payment Processors

  6. Connect Airbnb

  7. Add Owners

  8. Listings Setup

  9. Reporting Preferences

  10. Fees & Commissions

  11. Owner Statement Template

  12. Opening Balances

  13. Historical Data / Balances (Optional)

  14. Historical Owner Statements (Optional)

  15. Add Workflows

  16. Validate & Go Live

During Reporting Preferences, VRPilot suggests an account for each unmapped PMS line, so you can review and accept suggestions instead of mapping every line by hand. See Suggestions below.

How Initial Setup works

  • Go in order, or jump ahead. We recommend completing the steps in order, but you can open any step and VRPilot takes you to the right place.

  • Team-wide progress. Anyone on your team can pick up where a teammate left off.

  • Automatic completion. Steps are marked complete when VRTrust can detect it from your data. Otherwise you can mark them done, skip them or hide them.

  • Skip the whole guide. While Initial Setup is open, you can skip it from the gear menu in the guide with Skip guide.

  • Collapses when finished. Once every step is done, Initial Setup collapses so Ongoing Tasks moves to the top.


Ongoing Tasks

Early adoption: Ongoing Tasks is in early adoption and is rolling out to some teams. If you'd like to use it, reach out to our support team through the help chat and we'll turn it on for you.

Ongoing Tasks is a running checklist of the clean-up work that keeps your books accurate. Each step shows how many items need attention right now.

  1. Listings that need setup. Listings missing an owner, ownership percentage or fee template. Until these are set, reservations won't post and statements can't calculate.

  2. Map unmapped PMS line types. New line types from your PMS that don't have an account yet. VRPilot suggests an account for each one, and you can accept them one at a time or all at once.

  3. Bank reconciliation. For each bank account: match selected transactions, accept match suggestions, record unmatched deposits, record unmatched expenses, and review uncleared VRTrust transactions.

  4. Guest balances. Deposits not assigned to a reservation, cancelled reservations with a balance left, and departed reservations where the financials and payments don't match.

How Ongoing Tasks works

  • Live counts. Each step shows the number of items that need attention. When the count reaches zero, the step turns into a green check.

  • NOW tag. The step to work on next is tagged NOW.

  • One click to the work. Go to step opens the right screen with the right filter already applied, and a tip points to the control to use.

  • No manual check-offs. Steps complete on their own as you clear the items, so the list always reflects what's actually left.


Suggestions

Where VRTrust has enough information, VRPilot suggests what to do next so you don't have to work everything out by hand. Suggestions never change your books on their own: nothing is saved or posted until you accept it.

When you'll see suggestions

  • Mapping PMS reservation lines. For each unmapped line type in Settings → Accounting → Accounting Preferences → Reservations, VRPilot suggests the account it should post to, with a short reason, such as similar lines your team has already mapped. Sometimes the suggestion is to exclude the line from reporting instead. A suggestion can also include the revenue recognition, any channel exceptions, and whether the line is taxable.

  • Bank reconciliation. VRTrust suggests matches between bank lines and VRTrust transactions on the Match suggestions tab, where you can accept them all at once.

  • Choosing accounts on transactions. When you pick an account on an expense, deposit or bank rule line, suggested accounts appear first on the Available tab.

Review and accept suggestions

For reservation line mappings:

  1. When VRPilot has suggestions, a banner at the top of the page says how many unmapped lines it has a suggestion for. Click Show unmapped to see only lines that still need an account.

  2. On each row, review the suggested account and the reason VRPilot gives. A suggestion to exclude the line appears on an orange card.

  3. Click Use to accept a single suggestion. Everything in the suggestion, such as the account, revenue recognition and channel exceptions, is saved together.

  4. If you agree with all of them, click Apply all in the banner to accept every suggestion at once. If any line can't be saved, VRTrust tells you which one.

  5. If you'd rather use a different account, open the account field and pick it. The suggested account carries a Suggested badge in the list, and choosing another account replaces the suggestion.

Good to know

  • You stay in control. Nothing posts until you click Use or Apply all.

  • Not every line gets a suggestion. When VRPilot has nothing to go on, the line stays unmapped for you to map yourself.

  • Apply all only touches unmapped lines. Lines you've already mapped aren't changed.

  • Easy to change later. To undo an accepted suggestion, pick a different account on the row or exclude the line.


Tips on the Page

When you go to a step, VRPilot shows a tip next to the control you need. Click Got it to dismiss it. Dismissed tips stay dismissed for you, on any device. A small VRPilot icon stays on the control, so you can click it to see the tip again.


VRPilot Settings

You can change how VRPilot appears from the VRPilot section in Settings, or from the gear menu in the guide.

Setting

What it does

Enable or disable

Turns VRPilot on or off. When it's off, the guide and its tips no longer appear. Turn it back on at any time to pick up where you left off.

Docked

The default. The guide opens as a panel next to the navigation bar and moves the page aside, so it never covers your work.

Floating

The guide sits in the bottom-right corner, next to the chat button, and opens as a card over the page.

  • Docked or floating is your choice. The layout is saved to your user settings, so it follows you to any browser and doesn't change it for your teammates.

  • Switch any time. Changing the layout doesn't affect your progress.


FAQ

Can I skip a step and come back to it later?
Yes. In Initial Setup you can skip any step and return to it later, and your progress on other steps is kept.

Do I need Ramp to finish setup?
No. Connect Ramp is optional. Skip it if your team doesn't use Ramp.

Will VRPilot change anything without asking?
No. Suggestions are only saved when you click Use or Apply all.

The guide covers part of my screen. Can I move it?
Yes. Switch it to Docked in VRPilot settings so it opens next to the navigation and moves the page aside instead.

Why don't I see the guide?
VRPilot may be turned off in Settings. If it isn't, reach out to our support team.

Why don't I see Ongoing Tasks?
Ongoing Tasks is rolling out to teams gradually. Reach out to our support team through the help chat and we'll turn it on for you.

Can I mark an Ongoing Tasks step as done?
No. Each step completes on its own once its count reaches zero.

A tip keeps popping up. How do I stop it?
Click Got it. That tip stays dismissed for you until you reopen it from the VRPilot icon on the page.


Need help?

If you have questions about any step in the VRPilot guide, reach out to our support team via the help chat and we'll be happy to assist.

Related Help Articles

Did this answer your question?